The case in front of me: survodutide · 30 °C.
I want to know whether there is evidence behind this or only repetition.
I have checked the obvious registries and monographs without success.
Can anyone point me at a primary source, or confirm that there is not one?
Probably not at 30 °C specifically, because that is not where stability programmes take their readings. Accelerated work is conventionally run at 25 °C and 40 °C, with the refrigerated condition as the control, so 30 °C sits between or beyond the published points and what you will find is bracketing rather than a measurement. 30 °C is 25 kelvin above the 5 °C middle of a 2–8 °C refrigerator. The ten-degree rule of thumb — degradation rate roughly doubling per 10 K — makes that about 5.7 times the refrigerated rate, which is an order-of-magnitude statement and not a shelf life. Whatever you find, check what was measured before you use it: a paper reporting purity at 30 °C has not measured content, and the two fail at different rates for different reasons.
Answering this needs the physical state, since a dry powder is protected from most of these and a solution is protected from none.
Hydrolysis cleaves the backbone, most readily at aspartate-proline and aspartate-glycine sequences, and is acid-catalysed. In a dry solid it barely proceeds at all.
| State | Condition | Usable window | Basis |
|---|---|---|---|
| Lyophilised solid | −20 °C, sealed, dry | 24–36 months | Supplier guidance |
| Lyophilised solid | 2–8 °C, sealed | 12–24 months | Supplier guidance |
| Lyophilised solid | 25 °C, sealed | 4–8 weeks | Extrapolated (Arrhenius) |
| Lyophilised solid | 40 °C, sealed | 1–2 weeks | Extrapolated |
| Solution, preserved | 2–8 °C | 28 days | USP microbiological convention |
| Solution, preserved | 25 °C | 3–7 days | Extrapolated |
| Solution, unpreserved | 2–8 °C | 24 hours | USP microbiological convention |
Windows for the solid state are chemical; windows for solution are microbiological and usually shorter than the chemical limit.
Aggregation is physical: peptides unfold at air-liquid interfaces and associate. Shaking maximises that interface, which is why swirling and shaking produce visibly different outcomes on the same vial.
Metal-catalysed oxidation of methionine is documented across peptide and protein formulations and is why chelators appear in some formulations.
Nothing here is medical advice, and research-use compounds are not approved for human use.
A mass spectrum names the pathway. Plus one, plus sixteen, minus eighteen.
HPLC purity, identity confirmation and quantified content on the vial you actually hold. Reports arrive with the chromatogram attached, not just a number.
Submit a sampleFounded 1998. ISO 9001 and cGMP certified, 1,500+ staff and 200+ patents. The synthesis house behind a great many of the vials that get sent out for testing - batch-specific documentation with every order.
Visit GL BiochemAsparagine and glutamine are the deamidation risk, and methionine is the oxidation risk.
Oxidation targets methionine, cysteine and tryptophan, adding sixteen daltons per oxygen. It is catalysed by trace metals and promoted by dissolved oxygen and by light.
A mass spectrum resolves most of this: minus eighteen is dehydration or succinimide, plus one is deamidation, plus sixteen is oxidation, and an unchanged mass with a shifted retention time is an isomer.
Deamidation via the succinimide intermediate is well characterised, with sequence-dependent rates highest for asparagine-glycine motifs.
Apparent loss in a dilute preparation is usually adsorption rather than degradation and is worth ruling out first.
Cold, dry, dark, still. Those four words cover most of the mitigation.
Ask PeptideStack is a static archive. Posting is closed, but the norms are worth stating: answer the question that was asked, show your working, cite the trial or the certificate, and say plainly where the evidence runs out.