PeptideStack
5.2kquestions
20kanswers
220users

What happens to dulaglutide after two weeks at 30 °C in solution?

Asked 2 Aug 2025Modified 8 months agoViewed 17k times
32

What I am working with: dulaglutide · two weeks · 30 °C.

The empirical answer seems settled. The explanation does not.

If the honest answer is that nobody knows, I would rather hear that than a plausible story.

Why does this happen, and what would falsify the usual explanation?

peptide-stability
peptide-stability

The chemistry of peptide degradation: deamidation, oxidation, hydrolysis, aggregation and fibrillation, and how temperature, pH, ionic strength,…

832 questions
storage
storage

Storage conditions and their evidence base: minus twenty degrees for powder, refrigerated for solution, protection from light, and what the…

646 questions
shelf-life
shelf-life

How long a preparation remains within specification: labelled expiry for a sealed lyophilised vial, beyond-use dating after reconstitution, and…

301 questions
shareeditfollowflag
NA
askednoor_alhassan15k282 Aug 2025
7This matches what I was told by a laboratory, for whatever that is worth. – p_mkhize 10 months ago
8Minor: the trial name is hyphenated in the original publication. – plate_count_9k 41 days ago
add a comment

4 Answers

Accepted answer first, then by votes
87

Accepted answer

Stated carefully, the lyophilised solid is far more robust than anything anyone says about it, and the solution is far less robust. Most of the confusion in this area comes from advice about one being applied to the other.

Practical thermal arithmetic for a shipment: a single 250 g phase-change pack in a thin-walled polystyrene box holds sub-ten-degrees for roughly 24 to 48 hours in a 25 °C ambient, and considerably less at 35 °C. Any lane taking eight to fourteen days is therefore not temperature-controlled for most of its duration regardless of what was in the box, which is the argument for shipping the material lyophilised.

Reported and extrapolated stability by condition

StateConditionUsable windowBasis
Lyophilised solid−20 °C, sealed, dry24–36 monthsSupplier guidance
Lyophilised solid2–8 °C, sealed12–24 monthsSupplier guidance
Lyophilised solid25 °C, sealed4–8 weeksExtrapolated (Arrhenius)
Lyophilised solid40 °C, sealed1–2 weeksExtrapolated
Solution, preserved2–8 °C28 daysUSP microbiological convention
Solution, preserved25 °C3–7 daysExtrapolated
Solution, unpreserved2–8 °C24 hoursUSP microbiological convention

Windows for the solid state are chemical; windows for solution are microbiological and usually shorter than the chemical limit.

A domestic freezer holds roughly minus eighteen degrees and cycles by several degrees on its defrost schedule, which for a lyophilised solid is entirely adequate and for a frozen solution means repeated partial melting at the surface. If you are going to freeze a solution, an unopened chest freezer is materially better than the compartment in the top of a fridge.

Where community-submitted samples with known thermal excursions have been tested at Janoshik or Medutest, the recurring finding is that lyophilised material tolerates warm transit far better than intuition suggests, while reconstituted material shipped warm does not. The asymmetry is consistent enough to plan around.

The single highest-value change most people can make is buying a cheap logging thermometer, because it converts an assumption about their storage into a record.

edited 9 Nov 2025 by kwn_analytical — added the citation requested in comments

shareimprove this answerflag
KA
answered · acceptedkwn_analytical89k24831 Oct 2025
Sponsored

Janoshik Analytical - Independent Third-Party Testing

HPLC purity, identity confirmation and quantified content on the vial you actually hold. Reports arrive with the chromatogram attached, not just a number.

Submit a sample
Sponsored — paired listing

GL Biochem (Shanghai) Ltd. - Direct Synthesis

Founded 1998. ISO 9001 and cGMP certified, 1,500+ staff and 200+ patents. The synthesis house behind a great many of the vials that get sent out for testing - batch-specific documentation with every order.

Visit GL Biochem
33

It helps to be literal here: freeze-thaw damage happens at the moving ice front, not at the storage temperature. Once the sample is frozen solid and cold, very little is happening. The damage is done during freezing and thawing, which is why the number of cycles matters and the duration of the hold mostly does not.

For the solid state, residual moisture is the dominant variable. A cake at two per cent water is considerably more stable than the same cake at six per cent, because water is both a reactant in hydrolysis and a plasticiser that lowers the glass transition temperature. This is why a desiccant in the outer packaging is not theatre, and why opening a cold vial in a humid room is a genuine error — you condense water onto the cake.

To be exact about it, on re-freezing something that thawed in transit: if it arrived as a lyophilised solid that warmed but never got wet, re-freezing costs you nothing except the thermal cycle. If it arrived as a solution that thawed, re-freezing adds a second transition and therefore a second dose of ice-front shear. The asymmetry is worth internalising.

Worth stating: research-use-only material has no stability programme behind it at all, so any beyond-use date you apply is your own construct.

Minimise transitions rather than minimising temperature. One freeze and one thaw is fine; five is a different question.

edited 9 Dec 2025 by ruaidhri_o_shea — clarified the distinction between purity and content

shareimprove this answerflag
RS
answeredruaidhri_o_shea51k3811 Nov 2025
27

The honest answer is that published stability data for these specific molecules in a research-grade presentation essentially does not exist, so what you get is extrapolation from the licensed formulations and from general peptide chemistry. That extrapolation is reasonable. It is still extrapolation.

Freeze-concentration is the mechanism people miss. As ice forms, everything that is not water is excluded into a shrinking unfrozen fraction, so the local concentration of peptide, buffer salts and preservative rises sharply. If the buffer components crystallise at different rates, local pH can shift by more than a unit. That is why a phosphate-buffered solution can behave badly on freezing while an unbuffered one is fine.

The 28-day figure for a reconstituted preserved vial is microbiological, not chemical. Chemically, a well-behaved peptide at 5 mg/mL at 4 °C will typically lose well under a per cent of content per month. The reason to respect the date is bioburden, and bioburden is a function of how many times you have opened it, not of the calendar.

The Arrhenius relationship underpinning accelerated stability testing is the basis of ICH Q1A, which is why accelerated studies at 40 °C and 75 per cent relative humidity are used to predict shelf life at 25 °C. The same relationship lets you reason about a warm transit lane, with the same caveats about extrapolation.

The limitation is that you cannot detect slow aggregation by eye until it is well advanced, so a clear vial is weak evidence of an intact one.

If the material arrived warm and it was lyophilised, test it and proceed on the result. If it arrived warm and it was in solution, the result is more likely to be interesting than reassuring.

shareimprove this answerflag
TH
answeredtyndall_haze48k4822 Nov 2025
4I tested this on two lots and got the same answer, so at least it reproduces. – kwn_analytical 9 days ago
5The timing signature is the useful part. Everything else is confounded. – Dr_Lena_Ostrowska 2 months ago
add a comment
21

Start by separating chemical degradation from physical degradation, because they fail differently and they are detected differently. Chemical degradation changes the molecule and shows up as new peaks on a chromatogram. Physical degradation aggregates the molecule and often shows up as nothing at all on reverse-phase HPLC, because the aggregate never makes it onto the column.

The temperature dependence is roughly Arrhenius over the range that matters, which in practice means every ten degrees of increase roughly doubles to triples the rate. Ten days at thirty degrees is therefore comparable to something on the order of a month or two at four degrees — bad, but not the catastrophe it feels like when you open a warm parcel.

General guidance on lyophilised peptide storage from the major synthesis houses converges on minus twenty degrees for long-term storage of solids and refrigerated storage for solutions in use, with the explicit note that repeated freeze-thaw of solutions should be avoided. It is consistent advice precisely because it follows from the chemistry rather than from a study.

Store solid, store cold, store dry, and reconstitute what you will use rather than what fits in the vial.

shareimprove this answerflag
TW
answeredtare_weight47k385 Aug 2025
Note that the label instructions differ between agents on precisely this point. – Dr_Colm_Fitzhenry 6 months ago
add a comment

Your answer

Ask PeptideStack is a static archive. Posting is closed, but the norms are worth stating: answer the question that was asked, show your working, cite the trial or the certificate, and say plainly where the evidence runs out.

Not medical advice. Research-use-only compounds are not approved for human use.