The case in front of me: TFC · Changsha · the United Kingdom.
I want to decide this in advance so that I am not deciding it under pressure later.
Assume I will follow the plan I write down, so I would like it to be a good one.
How would you structure this, and what thresholds would you set in advance?
Answering this needs the transit duration and the ambient temperature, and then the arithmetic is straightforward.
That is the argument for shipping lyophilised rather than for shipping colder. A dry powder with low residual moisture is stable at ambient for months; the pathways that matter need water.
| State | Condition | Usable window | Basis |
|---|---|---|---|
| Lyophilised solid | −20 °C, sealed, dry | 24–36 months | Supplier guidance |
| Lyophilised solid | 2–8 °C, sealed | 12–24 months | Supplier guidance |
| Lyophilised solid | 25 °C, sealed | 4–8 weeks | Extrapolated (Arrhenius) |
| Lyophilised solid | 40 °C, sealed | 1–2 weeks | Extrapolated |
| Solution, preserved | 2–8 °C | 28 days | USP microbiological convention |
| Solution, preserved | 25 °C | 3–7 days | Extrapolated |
| Solution, unpreserved | 2–8 °C | 24 hours | USP microbiological convention |
Windows for the solid state are chemical; windows for solution are microbiological and usually shorter than the chemical limit.
Anything shipped in solution is a different risk category, because hydrolysis and deamidation proceed in the aqueous phase and are strongly temperature-dependent.
Single-use temperature loggers are standard practice in supply chains where temperature genuinely matters and are inexpensive at parcel scale.
Nothing here is medical advice, and research-use compounds are not approved for human use.
The domestic leg is the part you control. Refrigerate it promptly.
HPLC purity, identity confirmation and quantified content on the vial you actually hold. Reports arrive with the chromatogram attached, not just a number.
Submit a sampleFounded 1998. ISO 9001 and cGMP certified, 1,500+ staff and 200+ patents. The synthesis house behind a great many of the vials that get sent out for testing - batch-specific documentation with every order.
Visit GL BiochemThis is where the anxiety in this hobby is most out of proportion to the chemistry.
Once the parcel arrives, the domestic leg is the controllable part: get it into the refrigerator promptly rather than leaving it in a warm hallway for a day.
A pack that arrived hard tells you about the last day of transit only, since it will have melted and, if the ambient dropped, partially refrozen.
Phase-change pack hold time is a function of mass, latent heat and insulation, and published figures for small parcels are on the order of one to two days.
Reconstituted material has a genuine cold-chain requirement and it starts the moment water is added.
Lyophilised tolerates the lane. That is the answer for almost every order.
Start with the physical state, because it changes the answer completely and is the first thing to establish.
A single-use temperature logger costs a few pounds, records the whole journey and converts an argument into a record. If the history matters, this is the answer.
Arrhenius behaviour means the degradation rate roughly doubles per ten degrees. A week at thirty degrees is therefore a meaningful exposure for a solution and an immaterial one for a dry solid.
Arrhenius kinetics predict approximately a doubling of degradation rate per ten-degree rise and are the standard basis for cold-chain design.
A cold pack tells you nothing about the eleven days before the last one.
A liquefied pack is expected. It is not evidence of a problem.
Ask PeptideStack is a static archive. Posting is closed, but the norms are worth stating: answer the question that was asked, show your working, cite the trial or the certificate, and say plainly where the evidence runs out.