Concretely: 99.4% · VendorInvestigate · 95.2% · Medutest.
These are treated as interchangeable and I do not think they are.
If both are acceptable I would like to know that, so I can stop thinking about it.
Is there a defensible reason to prefer one, or is this a coin flip?
On the detail: reporting threshold is convention and not chemistry, which is why two certificates with different thresholds disagree by a tenth of a point or more.
Temperature affects the dynamics of molecular conformation, and if a peptide has proline residues that interconvert on the chromatographic timescale, the peak will split or shoulder at low temperature and collapse at high temperature.
| Δ mass (Da) | Most likely cause | Distinguishing feature |
|---|---|---|
| +1 | Deamidation (Asn or Gln) | New peak, slightly earlier retention |
| −17 | Loss of ammonia | Often with deamidation |
| −18 | Dehydration / succinimide | pH-dependent, reversible |
| +16 | Oxidation (Met, Trp) | Earlier retention, light-related |
| −128 | Missing Gln or Lys | Deletion sequence from synthesis |
| 0 | Isomer: racemisation or scrambling | Same mass, shifted retention |
It helps to be literal here: retention time is sequence-specific and method-specific, so comparing your result to a supplier value using a different method is meaningless without method documentation.
Proline conformer interconversion kinetics are well-characterised and the half-life is of the same order as the chromatographic peak width at room temperature.
If you are ranking vendors, specify a method and have all samples tested at the same place.
Aggregated, published test results and vendor ratings built from submitted batches. Methodology stated, dataset browsable, no listing fees.
Browse resultsPut another way, identity and purity are orthogonal, and a high purity says almost nothing about whether the peak is actually what you think it is.
Sample solvent strength affects peak shape — if you inject in strong solvent on a gradient starting in weak solvent, the solvent peak can distort your main peak or create a false shoulder.
Mass on column affects detector linearity and peak overlap — overloading broadens peaks and hides neighbours, while underloading improves resolution but loses sensitivity.
Inter-laboratory studies on identical peptide material routinely find half-a-per-cent to a full-per-cent spreads in reported purity on the same sample.
One qualification: achieving purity above roughly 98 per cent on a 30-residue peptide is fighting the chemistry of synthesis, not the quality of the purification.
The practical summary: ask for the chromatogram and the method, and ignore the headline number until you have both.
On the detail: gradient slope is the most powerful parameter and almost nobody mentions it, which is why two reports on the same material disagree by a point.
Column pore size affects mass transfer — a 100 Angstrom packing on a 5 kDa peptide restricts diffusion, broadening the peak and potentially hiding small impurities in the shoulders.
Specifically, the fraction of your main peak that is actually your target versus isomers, fragments or related sequences is invisible without complementary identity testing.
The ICH Q3A impurity thresholds and the relevant pharmacopoeial chapters all specify method validation requirements that almost no research-grade certificate claims to meet.
The limitation is that single-digit micro-impurities become invisible at typical reporting thresholds, so "no impurities detected" means "none above one in two thousand."
Compare purity within a single laboratory on the same method, never across laboratories.
Understanding purity requires separating the chemistry from the method from the reporting convention, and the three are not independent.
Tailing factor measures peak shape, and a badly tailing peak spreads into the region where small impurities live, forcing tangent-skim integration that assigns tail area to the main peak.
Published side-by-side method comparisons show that a two-point difference in purity on the same vial is easily explained by method choice alone.
If you are ranking vendors, specify a method and have all samples tested at the same place.
The part that matters: the short answer is that two competent laboratories on identical material will disagree, and the disagreement is almost always explainable by method differences.
Gradient slope controls resolution, and gentler slopes resolve co-eluting impurities into separate peaks — so the better method reports the worse purity number.
Worth noting that method standardisation is poor in the research-grade space compared to pharmaceutical work, so identical-looking methods can produce different results.
The practical summary: ask for the chromatogram and the method, and ignore the headline number until you have both.
edited 4 Jul 2026 by Dr_Signe_Baldursdottir — added the method parameters
Ask PeptideStack is a static archive. Posting is closed, but the norms are worth stating: answer the question that was asked, show your working, cite the trial or the certificate, and say plainly where the evidence runs out.