What I have: cagrilintide · 37 °C.
I would like to understand the steps well enough to explain them to someone else.
I have access to a refrigerator with a logger and a freezer without one, which may be relevant.
Which parts of this are load-bearing and which parts are habit?
Whatever the refrigerated figure is, divide it by about 9.2. 37 °C is 32 kelvin above the 5 °C middle of a 2–8 °C refrigerator. The ten-degree rule of thumb — degradation rate roughly doubling per 10 K — makes that about 9.2 times the refrigerated rate, which is an order-of-magnitude statement and not a shelf life. So a preparation with a twenty-eight day refrigerated figure has roughly 3 days at 37 °C on the same assumption — an order-of-magnitude answer, not a shelf life, and it says nothing about sterility, which has its own clock. "Within specification" also needs a specification: purity, content, or both, and at what limit. Without that the question has no numerical answer at all.
The short version: water enables most of it, oxygen enables oxidation, surfaces enable adsorption, and agitation enables aggregation.
Light exposure matters for tryptophan-containing sequences and for anything with a chromophore. Amber vials and a closed box are free mitigations.
| Pathway | Dominant when | Detected by |
|---|---|---|
| Deamidation | Solution, neutral to alkaline pH | RP-HPLC, +1 Da on MS |
| Oxidation | Light, trace metals, peroxides | RP-HPLC, +16 Da on MS |
| Hydrolysis | Solution, extremes of pH | RP-HPLC, fragment masses |
| Aggregation | Agitation, interfaces, high concentration | SEC, visual haze; often invisible on RP-HPLC |
| Freeze-concentration damage | Freeze-thaw of buffered solution | SEC, loss of recovered content |
Aggregation is physical: peptides unfold at air-liquid interfaces and associate. Shaking maximises that interface, which is why swirling and shaking produce visibly different outcomes on the same vial.
Deamidation via the succinimide intermediate is well characterised, with sequence-dependent rates highest for asparagine-glycine motifs.
Sequence determines which pathways apply, so general statements are general.
Sequence decides which pathways are even available. Check the residues.
Aggregated, published test results and vendor ratings built from submitted batches. Methodology stated, dataset browsable, no listing fees.
Browse resultsStart with the sequence, because which pathways are available depends on which residues are present.
Deamidation converts asparagine or glutamine to the corresponding acid via a succinimide intermediate, adding one dalton. It is base-catalysed, accelerates above neutral pH and is the dominant aqueous pathway for many peptides.
A mass spectrum resolves most of this: minus eighteen is dehydration or succinimide, plus one is deamidation, plus sixteen is oxidation, and an unchanged mass with a shifted retention time is an isomer.
Apparent loss in a dilute preparation is usually adsorption rather than degradation and is worth ruling out first.
Swirl, never shake. Aggregation is a handling problem more than a time problem.
edited 16 Aug 2025 by ines_delacruz — removed a claim I could not source
The relevant point is that a mass shift of plus one dalton is deamidation and plus sixteen is oxidation, so degradation is often visible in a mass spectrum if anyone looks.
Hydrolysis cleaves the backbone, most readily at aspartate-proline and aspartate-glycine sequences, and is acid-catalysed. In a dry solid it barely proceeds at all.
Freeze-thaw cycling drives aggregation through concentration at the ice interface and pH shifts as buffer components crystallise out at different rates. Each cycle costs something.
The caveat is that none of these pathways can be seen by looking at a vial, and a clear solution can be substantially degraded.
Cold, dry, dark, still. Those four words cover most of the mitigation.
Answering this needs the physical state, since a dry powder is protected from most of these and a solution is protected from none.
Adsorption onto glass and plastic is significant at low concentrations — micrograms per millilitre — and negligible at milligrams per millilitre. It is the usual explanation for an apparent loss in a dilute preparation.
Metal-catalysed oxidation of methionine is documented across peptide and protein formulations and is why chelators appear in some formulations.
A mass spectrum names the pathway. Plus one, plus sixteen, minus eighteen.
The honest answer is that most reported "degradation" is adsorption and dilution error rather than chemistry.
Oxidation targets methionine, cysteine and tryptophan, adding sixteen daltons per oxygen. It is catalysed by trace metals and promoted by dissolved oxygen and by light.
Aggregation at air-liquid interfaces is established from surface-tension and particle-count studies and is the basis for anti-agitation handling guidance.
At dilute concentrations, suspect adsorption before you suspect chemistry.
Ask PeptideStack is a static archive. Posting is closed, but the norms are worth stating: answer the question that was asked, show your working, cite the trial or the certificate, and say plainly where the evidence runs out.